HF-Ri TD

   

Features and Benefits:

• Lamp power can be regulated from 1% to 100%
• Flat ballast design, 21 mm high
• Digital control input according to the industry-standard DALI (Digital Addressable Lighting Interface) combined with the Touch and Dim pushbutton protocol
• Increased lamp wire flexibility thanks to the Parasitic Capacitance Compensation (longer lamp wiring possible up to 2 m)
• Protected against excessive mains voltages, incorrect connections and incorrect lamp use
• Striation-free operation, no stroboscopic effects
• Lamp starts at 1% (DALI 1%..100% in 250 ms, from 100%..1% in 100ms)
• Automatic stop circuit is activated within 5 s in case of lamp failure (safety stop)
• Ballast resets automatically after lamp replacement
• Up to 75% reduction in energy consumption by using automatic lighting control systems (e.g. Philips ActiLume luminaire-based system solutions)
• Quick programmed start: 0.5 s, flicker-free warm start by preheating the lamp electrodes enables lamps to be switched on and off without reducing useful life.
• Ideal for areas with a high switching frequency and where presence detection requires immediate start
• Low energy consumption in standby 0.35 W due to new EII technology
• Smart power ensures constant light, independent of mains voltage fluctuations EII-dim technology: a dedicated IC for independent control of each electrode: lamp life is unaffected by dimming level stable lamp burning at every dimming level maximum energy savings in dimmed operation

Applications

• Offices requiring simple, easy-to-install dimming or personal light level adjustment, e.g. with ActiLume
• DALI installations with daylight linking and/or movement detection (for energy savings)
• DALI installations with remote control systems (combining energy savings with comfort)
• Installations with emergency back-up, according to IEC 60598-2-22